Connecting MID Approved Meter to Inverter

In the system, a mid approved meter must be installed to ensure correct monitoring of the grid power. The inverter uses this information to decide whether to charge or discharge the battery.

The CT clamp that is connected to the mid approved meter must be installed around the live incoming supply to the property, with the arrow pointing in the direction of grid import, in order to monitor the complete consumption of the building.

• Related Articles

• Connecting GEM120CT to GivEnergy Inverter

  Overview The GEM120CT communicates with the inverter via RS485 Modbus. This allows the inverter to calculate import/export power in real time. RS485 Communication Wiring Connection GEM120CT Terminal Inverter Port Cable Example RS485 + 10 (A+) A+ ...

• Connecting GEM630MCT to a GivEnergy Inverter

  Overview The GEM630MCT communicates with the inverter through an RS485 Modbus link to relay metering data. RS485 Communication Wiring Connection GEM630MCT Port Inverter Port Cable Example RS485 + TXA+ (14) 485A (+) Orange / White RS485 – TXB– (13) ...

• Start-Up and Shut-Down of the Inverter

  Start-Up Procedure Connect the AC circuit breaker, ensure that the system is powered and commissioned using the portal/App. Ensure that the grid power is reading identical to that of the MID approved meter (this can be found on the screen of the ...

• Understanding LoRa Communication Between Inverter and Meter

  Overview LoRa (Long Range Radio) enables wireless communication between GivEnergy inverters and energy meters, eliminating the need for hardwired connections over long distances. How It Works The LoRa module in the inverter transmits data to the LoRa ...

• Monitor Your Meter from Portal

  Your GivEnergy system uses meter readings to calculate and display energy usage within the app and portal. These readings are generated by the inverter and depend on accurate meter installation and a stable internet connection. Data Calculation in ...