Understanding LoRa Communication Between Inverter and Meter

Understanding LoRa Communication Between Inverter and Meter

Overview


LoRa (Long Range Radio) enables wireless communication between GivEnergy inverters and energy meters, eliminating the need for hardwired connections over long distances.

How It Works

  • The LoRa module in the inverter transmits data to the LoRa receiver connected to the meter.

  • This allows for real-time monitoring of power import/export and system performance.

  • Communication relies on correct wiring and channel configuration for reliability.

Benefits

  • No need for Ethernet cabling.

  • Strong signal over long ranges (hundreds of metres).

  • Secure and low-power communication.


    • Related Articles

    • Common Wiring Mistakes When Installing LoRa

      Overview Incorrect wiring can cause communication failures between the inverter and the meter. This guide outlines common mistakes and how to avoid them. Common Errors Mistake Description Corrective Action Using wires from two different pairs Mixing ...

    • How to Wire the GivEnergy LoRa Data Cable

      Overview This guide explains how to correctly wire the GivEnergy LoRa Data connection between the inverter and the meter for Gen3 systems. Correct wiring ensures stable data communication and prevents signal loss between devices. Wiring Instructions ...

    • Communication Cable Set Up Configurations

      Wiring diagram for 2 inverters with one Solar String Inverter Wiring diagram for 2 inverters with two Solar String Inverters Wiring diagram for 3 inverters with one Solar String Inverter Wiring diagram for 3 inverters with two Solar String Inverters ...

    • Communication Overview

      Please ensure the system is turned off before modifying anything. Item Function Foot position Note E1 DI1 and DI2 input port 1: DI1+ 2: DI1- 3: DI2+ 4: DI2- E2 Meter and EMS communication port 1: Meter-RS485+ 2: Meter-RS485- 3: GND 4: EMS-RS485+ 5: ...

    • LoRa Configuration

      Note: This guide is intended for use with LoRa devices with a digital display only. Main Display in LoRa Radio Mode LoRa Mode Antenna 240VAC RS-485 L N Signal strength / Signal to noise ratio Frequency info / Spread factor Serial Port Settings Set to ...

    GivBot