Start-Up and Shut-Down of the Inverter

Start-Up and Shut-Down of the Inverter

Start-Up Procedure

  1. Connect the AC circuit breaker, ensure that the system is powered and commissioned using the portal/App. Ensure that the grid power is reading identical to that of the MID approved meter (this can be found on the screen of the meter).

  2. Turn on the DC switch

  3. The inverter will start automatically when the PV voltage is higher than 90V

Shutdown Procedure

  1. Disconnect the AC circuit breaker to prevent it from being reactivated

  2. Turn off the PV/DC switch

  3. Check the inverter operating status

  4. Wait until all LEDs have gone out. The inverter is now shut down


    • Related Articles

    • How to fix a failed Firmware Update for the Generation 3 Hybrid Inverter

      What you’ll need USB A-to-A cable (use a USB-C adapter if your laptop needs one; the video mentions links in its description) Laptop Access to the GivEnergy firmware downloads, navigate from the main site: https://givenergy.co.uk/ Important safety ...

    • Connecting GEM120CT to GivEnergy Inverter

      Overview The GEM120CT communicates with the inverter via RS485 Modbus. This allows the inverter to calculate import/export power in real time. RS485 Communication Wiring Connection GEM120CT Terminal Inverter Port Cable Example RS485 + 10 (A+) A+ ...

    • View Inverter Firmware and Settings

      To view your inverter firmware: Step 1: Log into the GivEnergy Monitoring Portal at www.givenergy.cloud. Step 2: On your portal dashboard, hover over the ‘My Inverter’ card and select the expand icon. Step 3: Click ‘Software’ on the All in One card. ...

    • Connecting GEM630MCT to a GivEnergy Inverter

      Overview The GEM630MCT communicates with the inverter through an RS485 Modbus link to relay metering data. RS485 Communication Wiring Connection GEM630MCT Port Inverter Port Cable Example RS485 + TXA+ (14) 485A (+) Orange / White RS485 – TXB– (13) ...

    • Connecting MID Approved Meter to Inverter

      In the system, a mid approved meter must be installed to ensure correct monitoring of the grid power. The inverter uses this information to decide whether to charge or discharge the battery. The CT clamp that is connected to the mid approved meter ...

    GivBot