Hardware Details
EMS Communication Port
There are 6 communication ports on EMS in figure 1 green square. For AC Couple plant system, CAN-1 port, and CAN-2 port not in use. Each RS485 port can support 1 inverter and 2 meters at the same time. RS485- 1 only can support grid meter(s) and one inverter, RS485-2 only can support generation meter(s) and one inverter, RS485-3 only can support load meter(s) and one inverter. RS485-4 for future use.
LED Identification
In figure 3, LED1 will show EMS status LED 2 will show communication status.
LED 1 | LED 2 | |||
Green and red flashing | RTC not set | Fast blue flashing | Initialising | |
Slow green flashing | Waiting status | Slow blue flashing | Waiting for network connection to GivEnergy server | |
Solid green | Normal status | Solid blue | EMS is online and communication with GivEnergy sever | |
Solid red | Error status | |||
Antenna Port
Attaching an antenna is mandatory for using Wi-Fi. LAN mode.
From figure 4, Antenna ports as shown Wi-Fi on the single as shown and 4G LTE on the two Antenna connection as shown in the above image.
Dip switch SW2
Switch SW4 can reset the WIFI module to factory setting.
Related Articles
Basic Hardware Diagnostics You Can Check Yourself
Overview This is a practical, at‑home diagnostic flow for GivEnergy systems. It helps you identify simple power or breaker issues that commonly cause batteries or inverters to go offline. Important safety notes Only perform basic visual checks and ...Setting Up a GivEnergy Installer Account
To create a GivEnergy Installer account, please provide the following details: Wholesaler Name Company Name Company Address Company Email Company Phone Number GivEnergy Installer Number / Certificate Date (attach certificate) If your wholesaler is ...Manage Octopus API Scheduler
Follow the steps below to remove any Octopus API Scheduler services from your GivEnergy system and regain full manual control: Go to www.givenergy.cloud and log in with your account details. Once logged in, head to your Dashboard. If it doesn’t load ...Manually Connecting Your EV Charger to the GivEnergy Cloud
This guide explains how to manually connect your GivEnergy EV Charger (EVC) to the GivEnergy Cloud if it does not come online automatically. These steps are typically used during troubleshooting or initial setup where WiFi details need to be entered ...AECC Dongle Setup Guide
This guide explains how to set up the GivEnergy AECC Multi-Connect Dongle, used on All in One 2, Gateway 2, and Gen 4 inverters. The dongle supports LAN, WiFi, Bluetooth, and 4G fallback and must be configured before your system can come online. ...