Generation Control & Export Control Settings

Generation Control & Export Control Settings

To adjust generation and export control settings:

Step 1: Log into the GivEnergy Monitoring Portal at www.givenergy.cloud

Step 2: On your portal dashboard, hover over the ‘My Inverter’ card and select the expand icon.

 

Step 3: In the ‘My Inverter’ screen, click the ‘Remote Control’ button found in the top right corner of the window

 

Step 4: Click ‘Inverter’ at the top of the Remote Control page.

 

Step 5: Scroll down the page until you see the ‘Control’ section.

 

Step 6: To adjust Generation Control, adjust the slider in the ‘Inverter Max Output Active Power Percent’ field between 0 and 100%. This is a combined hard and soft limit.

 

Step 7: To adjust the Export Control, scroll back to the top of the page and under ‘Grid Code’ in the ‘General��� section, toggle to enable G100 in the ‘Enable G100’ field.

 

Step 8: Adjust the Export Limit by sliding the value in the ‘Grid Export Limit’ field. This is a combined hard and soft limit.

    • Related Articles

    • Monitoring Portal System Mode Settings

      1. Access your Monitoring Portal Dashboard via www.givenergy.cloud and sign in using your username and password. 2. On your Monitoring Portal Dashboard, click on the My Inverter card. 3. Navigate to the System Mode Settings menu. 4. Here, you will ...

    • View Inverter Firmware and Settings

      To view your inverter firmware: Step 1: Log into the GivEnergy Monitoring Portal at www.givenergy.cloud. Step 2: On your portal dashboard, hover over the ‘My Inverter’ card and select the expand icon. Step 3: Click ‘Software’ on the All in One card. ...

    • Checking GEM120CT Readings

      Overview After installation, verify that the GEM120CT is reading correctly by comparing inverter data. Verification Steps Switch off all PV generation (turn off PV breakers or disable via web portal). In the GivEnergy Portal, navigate to: Inverter → ...

    • How to fix a failed Firmware Update for the Generation 3 Hybrid Inverter

      What you’ll need USB A-to-A cable (use a USB-C adapter if your laptop needs one; the video mentions links in its description) Laptop Access to the GivEnergy firmware downloads, navigate from the main site: https://givenergy.co.uk/ Important safety ...

    • Difference Between ID1 and ID2 Meters

      Overview Meters can be assigned an ID number between 1 and 8, defining their role within the system. The ID1 meter is always the main grid meter, while ID2–ID8 are used for monitoring additional devices. Meter Roles ID Function Typical Use Case ID1 ...

    GivBot