Work Modes

Work Modes

Off Peak Charging

This is prioritised to charge the battery during peak times when energy is cheaper, greener, and cleaner. The battery will start to discharge outside of the peak times when energy is more expensive.

Solar Charging

This is prioritised to charge the battery utilising excess solar generation, when energy is cheaper, greener, and cleaner. The battery will start to discharge outside of the peak generating hours when energy is more expensive.

Back Up Island Mode

The system has the ability to be used in the event of a power cut. To utilise this the All in One must be connected to a Giv-Gateway. In the event of a power cut the Giv-Gateway will seamlessly switch over to battery to power the whole home.

Grid Operation

Remotely disconnect your home from the grid at the push of a button using the GivEnergy App or Online Monitoring Portal.

    • Related Articles

    • Giv-Gateway Connection Guide

      All in One Installation with Giv-Gateway Extra care and attention must be taken when installing and maintaining any GivEnergy equipment. The system is capable of retaining a high voltage, even when disconnected. All electrical installations must be ...

    • EV charger wiring into Giv-Gateway

      The GivEnergy EV charger connects directly from 32A RCD to the grid busbar screw terminals highlighted below: Ensure grid breaker is isolated before commencing work 6mm single or larger required from RCD to busbar 32A 30mA RCD Type A If using confing ...

    • Monitoring Portal System Mode Settings

      1. Access your Monitoring Portal Dashboard via www.givenergy.cloud and sign in using your username and password. 2. On your Monitoring Portal Dashboard, click on the My Inverter card. 3. Navigate to the System Mode Settings menu. 4. Here, you will ...

    • Installation Configurations

      The GivEnergy EV charger is primarily controlled using the GivEnergy app & cloud resources. The specific features & functionality available with your GivEnergy charger will vary depending on your installation configuration. Below is a summary of the ...

    • Adjust Power Quality Response Mode Setpoints

      Power quality response mode includes: Volt-var response mode Volt-watt response mode Fixed power factor mode Reactive power mode Power rate limit mode The AIO supports all of these modes. Setting the Region setpoints Step 1: Log into the GivEnergy ...

    GivBot