Related Articles
AECC Dongle Setup Guide
This guide explains how to set up the GivEnergy AECC Multi-Connect Dongle, used on All in One 2, Gateway 2, and Gen 4 inverters. The dongle supports LAN, WiFi, Bluetooth, and 4G fallback and must be configured before your system can come online. ...
WiFi Dongle Troubleshooting
Common Issues If WiFi is password-protected, try the inverter serial number as the password. Reset the dongle by holding the button for 15 seconds, then wait 30 minutes before retrying. Only one device can connect to the dongle at a time. If you’ve ...
WiFi 6 Installation & Setup Guide
This guide explains how to install and configure the GivEnergy WiFi 6 Dongle. The process is the same for both internal and external WiFi 6 dongle models. Follow each step carefully to ensure your inverter connects securely to your home WiFi network. ...
WiFI Configuration
STA Interface Settings Click Search to scan for available WiFi networks. Select the customer’s WiFi network. Verify: RSSI (Signal Strength): ≥70% preferred. Channel/Frequency: Note this value for later AP setup. Enter the WiFi password in the ...
Quick Setup
Plug in and secure the dongle. Connect your device to the dongle WiFi. Go to 10.10.100.254 and log in (admin/admin). Switch to STA Mode. Scan, select your WiFi network, and enter the password. Check security settings: WPA2-PSK / AES. Restart the ...