Giv-Bat 2.6, 5.2 & 8.2 (Gen 1) Manual

Giv-Bat 2.6, 5.2 & 8.2 (Gen 1) Manual

Download Manual

This article summarises the key information from the Giv-Bat 2.6, 5.2, 8.2 (Gen 1) Manual, including installation guidance, system operation, LED behaviour, commissioning, and safety notes.

Overview

The GivEnergy Gen 1 Battery is a lithium iron phosphate (LiFePO₄) storage unit designed to store excess solar energy and provide power during high-demand periods. It connects to a GivEnergy Hybrid or AC Coupled Inverter as part of a complete home energy system.

Safety Information

  • Only qualified personnel should install the battery.
  • Do not open, tamper with, or modify the battery enclosure.
  • Ensure adequate ventilation around the unit.
  • Do not expose the battery to rain, freezing temperatures, or direct heat sources.

Product Features

  • High-density LiFePO₄ battery modules
  • Wall-mounted or floor-mounted installation
  • Integrated BMS for protection and status monitoring
  • LED indicators for operational state and faults

Installation Requirements

  • Install on a solid vertical wall or suitable floor surface.
  • Leave sufficient clearance for airflow.
  • Use the supplied brackets and fixings for mounting.
  • Connect the battery to the inverter using approved DC cables.

Electrical Connections

  • Ensure correct polarity when wiring the DC terminals.
  • Tighten all terminals securely to prevent overheating.
  • Connect communication cables between the battery and inverter as per the wiring diagram.

LED Indicator Status

  • Green Flashing: Normal operation
  • Solid Green: Fully charged
  • Red Flashing: Warning or communication issue
  • Solid Red: Battery fault

Commissioning

  1. Connect all DC and communication cables.
  2. Turn the battery isolator to ON.
  3. Power on the inverter.
  4. Verify the inverter detects the battery in the portal.
  5. Check LED indicators and ensure no alarms are present.

Maintenance

  • Keep the battery clean and free of dust.
  • Do not store objects on top of the unit.
  • Ensure firmware is updated via the inverter when required.

    • Related Articles

    • Giv-Bat 9.5 (Gen 2) Manual

      Download Manual This article summarises the Giv-Bat 9.5 (Gen 2) Manual, covering the Giv-Bat 9.5-G2 9.5 kWh LiFePO₄ battery. This Generation 2 model provides high capacity for larger home storage systems, supports parallel expansion, and integrates ...

    • Giv-Bat 5.12 (Gen 3) Manual

      Download Manual This article summarises the Giv-Bat 5.12 (Gen 3) Manual, covering the Giv-Bat 5.12-G3 5.12 kWh LiFePO₄ battery module. This compact Generation 3 model features enhanced BMS capabilities, modular stacking support, and lightweight ...

    • Giv-Bat 9.5 (Gen 3) Manual

      Download Manual This article summarises the Giv-Bat 9.5 (Gen 3) Manual, covering the Giv-Bat 9.5-G3 9.5 kWh LiFePO₄ battery. This third-generation model features advanced BMS hardware, improved communication architecture, modular stacking capability, ...

    • Stackable Batteries Manual

      Download Manual This article summarises the Stackable Batteries Manual, which applies to the GivEnergy Stackable Battery System. This system consists of a base module with integrated electronics and stackable battery modules that can be added to ...

    • All in One 2 & Gateway 2 Manual

      Download Manual This article provides a complete installation, safety, configuration, and maintenance summary for the GivEnergy All in One 2 (AIO2), including the MPPT Unit, Gateway 2, and Expansion Battery. It condenses all key information from the ...

    GivBot